Feed/Output rates to 33.3 GPH / 126 LPH 
      Output volume not affected by changes in 
      back pressure
Automated PPM Dosing System
Patented Tube failure Detection System
VGA Graphic backlit LCD displays motor speed, 
       input signal values, service and alarm status
Outputs include: Scalable 4-20mA and pulse; 
      One 10 amp relay and three 30 VDC contact 
      closures assignable to monitor Tube Failure 
      Detection System, Flow Verification System, 
      motor on, operating mode error.
No maintenance brushless Variable Speed Motor.

 

Selectable Doppler or Transit Time.
Non-invasive Clamp on Transducers.
“Smart” External Communications.
Data is logged to a standard SD card format. 
     It can be configured by the operator/user to 
     time interval, flow rate and total set-point 
     triggers.
Up to 500,000 events can be logged on the
     32MB SD card included with each unit.
Top Quality 320 X 240 pixel QVGA back 
     lit LCD.

 
 

Digital Control 
Variable Speed 
NEMA 4X (washdown) 
C3 series 
IP66 
2 Year Warranty 
DFDLeak Detection System

 
 
http://www.blue-white.com/proseries/ProSeries_High.wmv

 
 
 
Blue-White has been issued a patent for its exclusive Tube Failure 
Detection System. The U.S. Patent and Trademark office issued the 
patent, No.7, 001,153, on February 21, 2006. 
The TFD System is breakthrough technology for Peristaltic Style 
Chemical Metering Injector Pumps. The TFD System will detect a
wide range of chemicals and this exclusive technology was designed 
to disregard compatible fluids. If a non compatible fluid is detected, 
the injector pump will automatically shut off and energize a relay or 
switch, permitting 
communication with external equipment, such as a back-up pump
or alarm. 
Blue-White is the first peristaltic chemical metering injector 
pump manufacturer to add this kind of safety feature to its injectors. 
The TFD is now standard on all FLEXFLO A-100N metering 
injectors.

 
Link to More Info

 
MICRO-FLO DIGITAL METER
with Flow Rate and Totalizing
MICRO-FLOW
Verification Sensor

 

DIGITAL FLOWMETER
Providing an Accurate Means for Accessing Critical Information
This innovative new product is designed to be used with your 
metering pump to provide accurate Flow Measurement and 
Accumulated Flow Data. KNOW how much chemical your
metering pump is dispensing. 
The MICRO-FLOW may be installed directly into the pumps 
discharge tubing, in line in the system after the pump, or 
conveniently mounted to a panel.
For Innovation, Accuracy and Dependable Service, count on 
Blue-White’s MCIRO-FLOW VERIFICATION METER.

MICRO-FLOW FEATURES INCLUDE:
Model Variations include: Sensor Only; and Panel Mount 
   Display, which includes 25’ of Cable.
Six Digit LCD, up to Four decimal points
Displays both Rate of Flow and Accumulated Flow
User Selectable scale factors include:
          Flow units: Gallons; Liters; Ounces; Milliliters
          Time units: Minutes; Hours; Days
Non-volatile programming and accumulated flow memory 
Clear PVC viewing lens
Weather resistant Valox PBT enclosure.
LCD is not recommended for direct sunlight installation
 

 
New Digital Timer
Features:
4 Digit LCD display with built in icons, such as:
On-Time, Total-Time, TFD*, FVS, Alarm, Service...
Programmable timer:
From .1 second up to 200 Days
Accepts TFD* and FVS sensors
1 Amp relay - alarm output
Input Modes:
Manual, 4-20 mA, 0-10 VDC, Frequency, Pulses for batching operations.
1 Shot Timer and Pulse Batch
New Digital Timer Controls to be used on the C-1100E and A-100NE pumps.

 
New Material Option
Peristaltic Pump Tubing - Tygothane®
Polyurethane tubing (Tygothane®) is now available
on our A-100N FLEXFLO line of pumps
Features:
Excellent resistance to oils, greases and fuels
High tear resistance
Meets FDA criteria
Typical applications:
Food and cosmetic processing
Lubricant and degreaser dispensing
Coolant recovery systems

 
Injection Fittings - Check Valve
Newly Designed, Extra Strong with a Superior Seal.
Features:
Double seal
Ball check valve
Duckbill valve
Increased wall thickness for added strength
Includes duckbill to help prevent calcification
Tubing connection sizes
1/4" tube
3/8" tube
1/2" and 1/4" male NPT for pipe installation

This model replaces our existing injection fittings.

 
Flowmeter - New Air Flow Ranges 
New air flow ranges are now available for 
Blue-White's Popular Polysulfone Tube Flowmeters
Air flow Ranges:
F-450 series (3/8", 1/2", and 3/4" pipe)
1 - 6 SCFM  /  2 - 10 M3/HR
1 - 12 SCFM  /  2 - 20 M3/HR
2 - 22 SCFM  /  2 - 36 M3/HR

 
Flowmeter - New Air Flow Ranges 
New air flow ranges are now available for 
our Popular Acrylic Tube In-Line Flowmeters
F-400 series (1/4", 3/8", and 1/2" pipe)
0.2 - 2.0 SCFM  /  .4 - 3.2 M3/HR
1 - 12 SCFM  /  2 - 20 M3/HR
2 - 20 SCFM  /  4 - 34 M3/HR
F-410 series (3/4" and 1" pipe)
5 - 75 SCFM  /  10 - 125 M3/HR
10 - 80 SCFM  /  20 - 140 M3/HR

 


   Pipe sizes:
1" Female pipe threads (IPS)
1-1/2" Female pipe threads (IPS)
2" Female pipe threads (IPS)
     Fitting material
316 Stainless Steel
     Maximum Fluid Temperature:
200°F / 93°C  at 0 PSI
     Maximum Working Pressure:
300 psig / 20 Bar at 70°F / 21°C
     Accuracy (full scale):
F-1000 = +/- 2%  Full scale
F-2000 = +/- 1%  Full scale
Sensor = +/- 1%  Full scale

 

The New Polysulfone rib guided flowmeter 
is ideal for ultrapure applications where no 
metal is preferred in the fluid path.
Easy to read dual GPM/LPM scales. Silkscreened 
          with black ink for optimum contrast
No metals in fluid path
Pipe Size, 1 inch female NPT. Other pipe sizes 
          are available
Flow: from 1.0 to 20 GPM / 4.0 - 75.0 LPM

 

For Blue-White Ultra Pure Flowmeters
Polypropylene or PVDF Butt Fusion and
Socket Fusion Fittings for Ultra Pure 
Applications.

 

The Ideal Pump for OEM's.
Economical and versatile
OEM design modifications
Compact housing
Maximum PSI: 100
Maximum Feed Rate: 95.1 GPD or 250 ml/min
Duty Cycle: For intermittent use, 15% duty cycle
           (15 minute max on time)
Power:
           115V / 60Hz
           220V / 50 Hz
           230V / 60Hz
Shelf or wall mount (wall mount hardware included)
Dimensions:
           Height: 7-1/8"
           Width: 5-1/2" (with cord)
           Depth: 5-1/2"

 

 
 

We have replaced our F-452 flowmeter with the all NEW F-452N.
We completely redesigned this flowmeter from the ground up, 
while maintaining the end to end dimensions of the F-452.


Increased thread count
Larger half unions
Internal gland o-ring seal
Better protection against misalignment and vibration
Longer scale length
Improved meter body clarity
15% Increased pressure rating
33% Increased temperature rating
Fitting size:
2 inch Female pipe threads. Material = Polysulfone or PVC
2 inch Socket Fusion. Material = Polypropylene or PVDF
Additional Informtation:
In-Line (vertical) mount only.
Flow: from 2 to 175 GPM / 8 to 675 LPM (liquid)
                           4 to 240 SCFM / 7 to 400 M3/HR (Gas)

More about F-452N Flowmeters 
 

 

Acrylic Tube Variable Area Flowmeter (Rotameter)

F-430N Series flowmeters are machined  from from Highest Quality
solid cast acrylic rod that is polished to a crystal clear finish. 
Additional design features include: Corrosion and wear resistant 
internal parts, sturdy well built adapters and Viton* o-ring seals. 
Permanent scales are screen printed onto the meter body, directly in 
front of the float for easy reading. 

Pipe Size, 1-1/2 & 2 inch female NPT. 

Flow calibrations range from 4 GPM to 100 GPM 

Designed for in-line installation (Vertical).

More about Acrylic Flowmeters 
 

 
Click Here To Download English or Spanish Versions of Blue-White Literature

 
sales@blue-white.com

 

 
For Technical Information, including installation and parts 
drawings and, engineering data, visit www.blue-white.com

 
*Viton is a registered trademark of DuPont dow Elastomers.