 |
|
 |
 |
 |
Feed/Output rates to 33.3 GPH / 126 LPH
Output volume not affected by changes in back pressure
Automated PPM Dosing System
Patented Tube failure Detection System
VGA Graphic backlit LCD displays motor speed,
input signal values, service and alarm status
Outputs include: Scalable 4-20mA and pulse;
One 10 amp relay and three 30 VDC contact closures assignable to monitor Tube Failure Detection System, Flow Verification System, motor on, operating mode error.
No maintenance brushless Variable Speed Motor. |
Chemical
Wastewater treatment
Chlorination
Pulp & Paper Slurries
Printing inks
Oil based fluids
Gaseous fluids
Shear sensitive fluids
Caustics
Chemical Slurries
Food and Beverage |
 |
Link to More Information |
 |
 |
 |
 |
| Smaller
Footprint and lower feed rates than the C3
Digital
Control
Variable
Speed
NEMA
4X IP66
(washdown) Digital
Touch Pad
Backlit
LCD
2
Year Warranty
Display
diaphragm
Failure Alarm |
CHEM-PRO C2 features: PVDF Pump Head, Adapters and
double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 – 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump. CHEM-PRO™ C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
More Strokes Per Minute
Two Diaphragm Sizes
1.5 inch Low Flow 25.6 GPH, 97 LPH 2 inch High Flow 37.7 LPH, 142.7 LPH
Output pressures to 150 PSI, 10.3 Bar.
Maximum of 166 Strokes Per Minute
Brush life up to 3,400 hours, Extra set of
brushes are stored inside of the pump housing.
Operator friendly digital touch pad.
Easy to read Back Lit LCD display Display percentage of motor speed Display Diaphragm Failure Alarm |
DFD, Built-in Leak Detection System.
Senses a chemical in the pump head, shuts off the pump.
Priming / degassing valve built into
the pump head
Housing made of durable, chemical
resistant, powder coated Aluminum.
Injection fitting supplied with each pump.
Footvalve supplied with each pump.
Suction tubing, 10 feet, supplied with
each pump.
NEMA 4X and lp66 Washdown enclosure |
| Link to More Information |
|
 |
 |
 |
|
PVDF double ball valves.
Outputs to over
42.5 GPH, 1004 GPD 158 LPH, 3802 LPD
Output pressures to 175 PSI, 12.1 Bar.
Brush life up to 3,400 hours
Extra set of brushes are stored inside of
the pump housing. Operator
friendly digital touch pad.
Easy to read Back Lit LCD display Display percentage of motor speed Display Diaphragm Failure Alarm |
DFD, Built-in Leak Detection System.
Senses a chemical in the pump head, shuts off the pump.
Priming / degassing valve built into
the pump head
Housing made of durable, chemical
resistant, powder coated Aluminum.
Injection fitting supplied with each pump.
Footvalve supplied with each pump.
Suction tubing, 10 feet, supplied with
each pump.
Washdown enclosur |
| Link to More Information |
 |
Selectable
Doppler or Transit Time.
Non-invasive
Clamp on Transducers.
“Smart”
External Communications.
Data
is logged to a standard SD card format.
It can be configured by the operator/user to time interval, flow rate and total set-point triggers. Up
to 500,000 events can be logged on the
32MB SD card included with each unit. Top
Quality 320 X 240 pixel QVGA back
lit LCD. |
|
Sewage
Wastewater
Pulp & Paper Slurries
DI water
Discharge water
Caustics
Chemical Slurries
Ground water
Food and Beverage
Petrochemical
Any sound conducting liquid |
 |
| Link to More Information |
 |
|
||||||
| When you need a quality flowmeter
for a Water or Wastewater
Treatment Application, Count on Blue-White to Deliver! Blue-White Variable Area Flowmeters are available in more than 240 configurations, including models for In-Line, Panel Mount or Closed Pipe Installation. Blue-White flowmeters are constructed of Machined Clear-As-Glass Acrylic, Injection Molded Polysulfone or Injection Molded PVC. Internal parts are wear and corrosion resistant. Scales are screen printed onto the meter body directly in front of the float, for easy, accurate reading. Optional Design Features Include: Protective Shields; Flow Adjustment Valves, and High/Low Level Alarms. A wide range of calibrations are offered and, because they're Blue-White flowmeters, you know you're getting over 40 years of Manufacturing Experience, Superior Materials of Construction and Handmade Quality. Our Engineering Department, and Modern Machine Shop, enable us to offer a number of OEM options, including: Private Labeling, Alternate Materials of Construction and, Special Calibrations. Link to More Information |
|
with Paddelwheel Flowmeters |
Flow Verification Systems |
 |
 |
| Water
Ranges
30 to 7000 MLM (milliliters per min) Pipe Sizes 1/8" Female NPT 1/4" Female NPT 1/4" OD Tubing 3/8" OD Tubing Easy to read, 6 digit, up to 4 decimal positions, LCD display |
Designed to Monitor PumpOutput
The pump's electronics will continuously monitor the
|
| Three Model Variations:
|
Detect
a clogged injector.
Detect
an empty chemical supply tank.
Detect
a lost prime condition.
No
special connectors to buy.
No
calibration required.
Maximum
pressure rating 150 PSI
Link to More Information |
|
F-2000
|
|||
| BW DIGI-METER F-2000 Series electronic
insertion style flowmeters, are well suited for
monitoring flow in municipal water and wastewater applications. The clamp on saddle fitting and insertion sensor is quickly installed on IPS (ASTM-D-1785) pipe sizes from 1-1/2” through 12” and metric (DIN 8062) pipe sizes from 50 mm through 315 mm. The electronic display and communication enclosure can be mounted directly to the sensor, or remotely mounted to a pipe or panel. Standard F-2000 models display flow rate and accumulated total flow, and include an NPN open collector output for communication with data loggers, SCADA systems, and other external devices. Optional 4-20 mA / 0-10 VDC plug-in circuitry can be added for additional communication requirements. The optional batch processing plug-in circuitry includes an 8-amp relay board that adds manual or automatic batch processing capability, or a high/low flow rate alarm output. Link to More Information |
| F-1000 | |||
|
|||
| Blue-White's BW DIGI-METER F-1000 Series meters provide
the performance and features of
electronic meters, without the need for an electrical hook-up. Three versions of this top quality digital meter are offered: BW DIGI-METER F-1000RB Battery Powered RATE Meter BW DIGI-METER F-1000TB Battery Powered FLOW TOTALIZER BW DIGI-METER F-1000RT Battery Powered RATE Meter and FLOW TOTALIZER Link to More Information |
 |
 |
||||
| The highly engineered
design, and materials of
construction of the F-460 and F-461Series Variable Area Flowmeters, makes them well suited to applications where no metals can enter the fluid path (Ultra Pure), and for highly corrosive applications. No metals are used for the F-460 and F-461 Series wetted parts, such as floats and float guides. The float is guided by precisely engineered Polysulfone ridges, which are molded into the meter body. This means no metal contaminants in the fluid path. The F-460 Series and F-461 Series are constructed of durable, heat and chemical resistant Polysulfone. Standard float material is Teflon. Adapters may be ordered constructed of PVDF or PVC and o-ring seals are Viton. F-460 FLOW RATES:
F-461 FLOW RATES:
Link to More Information |
|
|
|
 |
|
 |
 |
*Blue-White Does Not Guarantee it's Flowmters for use with liquids other than water Link to More Information |
For Blue-White Ultra Pure Flowmeters Polypropylene or PVDF Butt Fusion and Socket Fusion Fittings for Ultra Pure Applications. Link to More Information |
 |
|
||||
| The CHEM-FEED C-1100 Series
and FLEXFLO A-100N Series combine Technology with
Quality
Materials of Construction, Pride of Workmanship and Ease of Operation. Chem-feed Units have Cartridege Valve Pump Heads that resist both clogging and airlocks. FLEXFLO Units are equipped with Blue-White's Superior Persitaltic Pump head, and include Blue-White's Patented Tube Failure Detection System. Both the CHEM-FEED C-1100 and FLEXFLO A-100N Series features both Fixed Spped and Variable Speed Motor Option, a wide range of feed rate choices, voltage options and OEM options. Link to More Information on CHEM-FEED C-1100 Link to More Information FLEXFLO A-100N |
 |
 Peristaltic Metering Pump, the FLEXFLO A-100N, or the High Pressure High Output CHEM-FEED C-1100 Series. The Star III tank is offered in three handy sizes, 7, 15 or 30 gallon capacity. A covered opening at the top of the tank makes addition of chemical quick and hassle free. The opening may be left open, closed or vented. A special drip edge pour spout protects the injector from chemical spills. A support rim helps to ensure the metering injector is secure on the tank. The tank has extra heavy wall thickness for added strength and stability as well as a convenient square shape. Link to More Information |
 |
Makes Fluid Metering Virtually Hassle Free The Star System is a Practical, Self Contained Metering System. It comes equipped with the The Blue-White C-1500 Injector of Your Choice - STANDARD, DELUXE or MICRO-FEED. The pump is mounted to a Sturdy Polyethylene Tank in 7, 15 or 30 gallon capacity. A Multi Position Opening in the Tank Lid makes Adding Chemical EASY. You can Open, Close or Vent It. The tank has extra heavy wall thickness for added strength and stability. Link to More Information |
| Click Here To Download English or Spanish Versions of Blue-White Literature |
|
|
 |
 |
 |
Blue-White is Compliant with Section 1605 of the
American Recovery and Reinvestment Act of 2009 Read More Here ARRA of 2009 Memo |
 |
 |
| For Technical Information, including installation and
parts
drawings and, engineering data, visit www.blue-white.com |
| *Viton is a registered trademark of DuPont Dow Elastomers. |
