flowmonitoringsystem

BW DIGI-METER F-2000 Series electronic insertion style flowmeters, are well
suited for monitoring flow in municipal water and wastewater applications.
The clamp on saddle fitting and insertion sensor is quickly installed on
IPS (ASTM-D-1785) pipe sizes from 1-1/2” through 12” and metric
(DIN 8062) pipe sizes from 50 mm through 315 mm. The electronic display
and communication enclosure can be mounted directly to the sensor, or
remotely mounted to a pipe or panel.
Standard F-2000 models display flow rate and accumulated total flow, and
include an NPN open collector output for communication with data loggers,
SCADA systems, and other external devices. Optional 4-20 mA / 0-10 VDC
plug-in circuitry can be added for additional communication requirements.
The optional batch processing plug-in circuitry includes an 8-amp relay
board that adds manual or automatic batch processing capability, or a
high/low flow rate alarm output.
The electronics can be battery operated using four standard AA size
batteries
or, AC powered using a 15-24V DC plug-in transformer. A battery back-up
option is also available. Battery life, in standard mode, is a minimum of one
year. A battery saving mode is available. LCD display icons indicate the
current operating mode, and warn of a low battery power condition. The
memory is nonvolatile, and therefore is not affected by loss of power. The
F-2000 Series is field programmable, and the programming mode is easily
accessed via three front panel tactile switches. The F-2000 can be factory
programmed to any required units of measure. The digital display is
housed in a corrosion resistant ABS enclosure and is acceptable for
outdoor use. For Superior Design, Quality and Function Insist on BW DIGI-METER!