 |
|
 |
 |
 |
 |
 |
|
|
 Digital
Control
Variable
Speed
NEMA
4X IP66
(washdown) Digital
Touch Pad
Backlit
LCD
2
Year Warranty
Display
diaphragm
Failure Alarm |
Blue-White Industries is rolling out an entirely
new line of products, The PRO SERIES, beginning with the CHEM-PRO C3 Series Metering Pump. The New C3 Metering Pump is well suited for use in many applications, including the Agricultural Industry for pumping fertilizers, and in some cases pH lowering chemicals (acid); in the Waste Water Treatment field; Municipalities; Plating and Metal Finishing; and larger HVAC Cooling Towers. Just to name a few. |
PVDF double ball valves.
Outputs to over
42.5 GPH, 1004 GPD 158 LPH, 3802 LPD
Output pressures to 175 PSI, 12.1 Bar.
Brush life up to 3,400 hours
Extra set of brushes are stored inside of
the pump housing. Operator
friendly digital touch pad.
Easy to read Back Lit LCD display Display percentage of motor speed Display Diaphragm Failure Alarm |
DFD, Built-in Leak Detection System.
Senses a chemical in the pump head, shuts off the pump.
Priming / degassing valve built into
the pump head
Housing made of durable, chemical
resistant, powder coated Aluminum.
Injection fitting supplied with each pump.
Footvalve supplied with each pump.
Suction tubing, 10 feet, supplied with
each pump.
Washdown enclosure |
 |
|
 |
 |
| Smaller
Footprint and lower feed rates than the C3
Digital
Control
Variable
Speed
NEMA
4X IP66
(washdown) Digital
Touch Pad
Backlit
LCD
2
Year Warranty
Display
diaphragm
Failure Alarm |
CHEM-PRO C2 features: PVDF Pump Head, Adapters and
double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump. CHEM-PRO C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
More Strokes Per Minute
Two Diaphragm Sizes
1.5 inch Low Flow 25.6 GPH, 97 LPH 2 inch High Flow 37.7 LPH, 142.7 LPH
Output pressures to 150 PSI, 10.3 Bar.
Maximum of 166 Strokes Per Minute
Brush life up to 3,400 hours, Extra set of
brushes are stored inside of the pump housing.
Operator friendly digital touch pad.
Easy to read Back Lit LCD display Display percentage of motor speed Display Diaphragm Failure Alarm |
DFD, Built-in Leak Detection System.
Senses a chemical in the pump head, shuts off the pump.
Priming / degassing valve built into
the pump head
Housing made of durable, chemical
resistant, powder coated Aluminum.
Injection fitting supplied with each pump.
Footvalve supplied with each pump.
Suction tubing, 10 feet, supplied with
each pump.
NEMA 4X and lp66 Washdown enclosure |
 |
Diaphragm:............................Teflon , (Teflon coated Hypalon ) Pump Head:............................PVDF (natural color) Pump Head Adapters:...........PVDF (natural color) Injection / Check valve: Body & insert: ......................PVDF (natural color) Check Ball: ..........................Ceramic Spring: ..................................Hastelloy C-276 Ball Seat O-ring:.................Viton. (optional EP) Static Seal O-ring: .............Viton. (optional EP) Footvalve / Strainer:.............PVDF (natural) / Polypropylene (grey) Suction Tubing (12 feet):...PVC (clear) |
Non-Wetted Components:
Enclosure: .............................413 Aluminum (powder coated) Pump Head Cover:................413 Aluminum (powder coated) Cover Screws:.......................300 Stainless Steel Motor Shaft:..........................Nickel plated steel DFD System Sensor pins:...Hastelloy C-276 Power Cord: ..........................3 conductor, SJTW-A Water-resistant |
 |
|
Priming valve / pressure relief valve
(located on pump head)
Pump head adapters:
Barbed, 1/2 tubing (2 pieces)
Threaded, 1/2 male NPT (2 pieces)
Threaded, 1/2 female NPT (2 pieces)
Footvalve
/ Stainer with 1/2 ceramic
ball and 1/2 barbed adapter (optional 1/2 male NPT adapter)
Injection Fitting with 1/2 ceramic ball and one 1/2 barbed
adapter (optional 1/2 male NPT adapter) Suction
tubing, 10 feet of 1/2 clear PVC tubing
Mounting brackets (2) with screws |
 |
| http://www.blue-white.com/proseries/ProSeries_High.wmv |
 |
|
|
 |
| For Additional Information and
to Download Spec Sheets Visit Our Technical Web Site |
www.blue-white.com |
| sales@blue-white.com |
 |
Blue-White is Compliant with Section 1605 of the
American Recovery and Reinvestment Act of 2009 Read More Here ARRA of 2009 Memo |
 |
 |
